LCH-711M
- The motors, the pneumatic jacks, and the mandrels are protected by a watertight bulkhead
- The pneumatic mandrels have been tested by thousands of manufactured units
- Mandrels protection by a self-draining, mechanical labyrinthed system (no bellows used)
- The chamfering mandrels and the 1st polishing mandrel are supplied with a mechanical stop
- Conveyor belt speed adjustable by control panel
- The system of transport stability and reduces the breaking of slabs
- Extractable support bar for large pieces
- Motorized pressing bar
- Control panel assembled on adjustable arm, always reachable
- No need of foundations, drainage point
After the success of the last V/O version of the LCV edge polisher, Marmo Meccanica is now proposing the same machine in the horizontal version, that is the LCH M-O/V.
In alternative to the “V-GROOVING” system, the new “V/O-CUTTING” system allows to polish on a continuous mode minimum 45 mm wide and maximum 30 mm thick back splashes and produce narrow strips with the same dimensions ready to be glued on “L” bordered kitchen tops.
- the narrow strip only to be processed, not the entire slab
- easier way to glue the two pieces together
- almost invisible gluing line
- possibility to create a stock of strips to be used when necessary.
The LCH M-O/V is a simple and affordable machine that, beyond being equipped with the “V/O-CUTTING” system, maintains all the features of an edge polisher for up to 60 mm thick slabs, chamfers, calibration and drip-cut.
- The motors, the pneumatic jacks, and the mandrels are protected by a watertight bulkhead
- The pneumatic mandrels have been tested by thousands of manufactured units
- Mandrels protection by a self-draining, mechanical labyrinthed system (no bellows used)
- The chamfering mandrels and the 1st polishing mandrel are supplied with a mechanical stop
- Conveyor belt speed adjustable by control panel
- The system of transport stability and reduces the breaking of slabs
- Extractable support bar for large pieces
- Motorized pressing bar
- Control panel assembled on adjustable arm, always reachable
- No need of foundations, drainage point
Two machines in one! The LCH-711M-SU is equipped with an outgoing motor that can be used for either 45 degree miter cutting or tooled with a profiling wheel.
If you are looking to process narrow strips, we offer a machine with a shortened bench that can polish and miter 1 3/4 “ pieces without the option to profile.
IN STOCK!
The LCH 711 machine is the horizontal standard for the flat polishing machines in the industry. This machine is capable of polishing straight flat-squared 1 to 6 cm thick marble, granite, or engineered stone edges at over 120 lineal feet per hour. The working mode is on a continuous process basis; this means that all the pieces are loaded one after the other on the machine and move past a series of polishing motors so that they come out completely finished including a micro-bevel on the top and bottom of the material. The LCH produces material vertically, as they are usually handled, and it is this system that, besides avoided possible breaks of the material, reduces machine cluttering in your warehouse and also the area necessary for the operation. Moreover, the LCH does not require either foundations or treatment for water discharge. In fact, it can be simply placed on the ground and as it is completely streamlined, the discharged water can be easily directed to a point at some distance, by means of a hose connected to a special drain.
- Fully automatic straight edge polishing
- Production speeds of 80 to 150 l/f per hour
- No height restrictions for material being processed
- 7 polishing heads enables processing in one pass
- Requires small foot print for set up and operation (Dimensions are 14’x6’)
- The LCH 711 requires no human intervention to oversee the operation and allows the operator to do other jobs
- Cost of lineal feet of finished edge amortized over 5 years is under .30 per foot
- 2 motors allow for V-grooving material for mitered edge
- Number of Polishing Motors: 7
- Number of Beveling Motors: 2
- Total Water Consumption: 12 to 15 gallons/minute
- Total Power Requirement: 230v/3phase/60amps
- Total Dimension of Machine: 10ft x 4ft x 4ft
- Total Weight of Machine: 3,000lbs
- Extension Tables: Standard 3ft in length
- Working Speed: 150 Lineal feet per Hour
- Maximum Abrasive Size: 6″ or 150mm
- Minimum material size: 3 inches x 16 inches (shorter pieces possible like 12″ x 12″ tile, contact us for details)
- Maximum material size: NO MAXIMUM